HOME | RESOURCES | CARBON CALCULATOR

CARBON CALCULATOR

Chiller Carbon Footprint Calculator | HydroBall ATCS
HydroBall logo

Carbon footprint calculator

Estimate chiller electricity use, related CO₂ emissions and potential savings with HydroBall ATCS across your chiller plant.

Your chiller

chillers

Scales the estimate across all identical chillers.

RT per chiller

Enter the chiller's rated cooling capacity in refrigeration tons (RT). Estimated electrical input is calculated using the kW/RT factor in Advanced settings.

%

Applied as an estimated average-load factor to energy and carbon calculations.

hours
%

Default 18%, based on the sponge-ball tube-cleaning study listed in the references. This is the estimated reduction in chiller electricity consumption, not total building energy consumption.

Advanced settings
days
kW/RT

Converts cooling capacity (RT) into estimated electrical input (kW). The default 0.934 kW/RT is an illustrative reference from the cited performance comparison; replace it with the chiller's measured or specified value where available.

kg CO₂e/kWh
S$/kWh

Used only for the cost estimate. Enter your own rate.

Water-use comparison assumptions

Enter the water used or discharged specifically for tube cleaning. Use comparable boundaries and units for each method. These figures do not include normal cooling-tower makeup water.

litres
times/year
litres
times/year
litres/year

ATCS default is 0 additional water discharged for the tube-cleaning process, reflecting its recirculating, no-routine-water-discharge design. Confirm the actual installation boundary and site conditions before using this as a reported result.

With HydroBall ATCS you save

0kg CO₂ per year
Without: 0 kg
With HydroBall: 0 kg
0
kWh saved per year
0
estimated cost saved per year
0
The amount of trees you will be saving
0%
reduction in chiller emissions
Annual water used or discharged for tube cleaning
Manual cleaning0 L/year
Other tube-cleaning systems0 L/year
HydroBall ATCS0 L/year
0
litres saved/year vs manual cleaning
0
litres saved/year vs other systems

Savings are calculated as the comparison method's annual water use minus HydroBall ATCS's annual additional water use. Negative values mean ATCS uses more water under the assumptions entered.

How it's worked out

Estimated electricity use per day (RT × kW/RT × H × chillers × utilization)
Estimated CO₂e per day (electricity × grid factor)
Estimated CO₂e per year (per day × operating days)
Chiller-specific electricity saved per year (electricity × savings %)
Estimated electrical input (RT × kW/RT)
Annual water used for manual cleaning
Annual water used for other tube-cleaning systems
Annual additional water used or discharged by ATCS

Thank you! Your enquiry has been submitted successfully.
Please check your information and try again.